`
cloudtech
  • 浏览: 4578555 次
  • 性别: Icon_minigender_1
  • 来自: 武汉
文章分类
社区版块
存档分类
最新评论

Linux cgroup机制分析之框架分析 【转】

 
阅读更多
一: 前言
前段时间,一直在写操作系统和研究Solaris kernel.从而对linux kernel关心甚少.不久前偶然收到富士通的面试,由于诸多原因推辞掉了这次机会.不过招聘要求给我留下了较深的印像.其中涉及到了cgroup机制.cgroup对我来说并不陌生,在LKML上看到过它的path.在2008 AKA大会上也有人对它做为专题分析.不过一直都没有深入代码研究.这段时间打算将kernel中新加的功能整理一下,就先从cgroup开始吧.
Cgroup是近代linux kernel出现的.它为进程和其后续的子进程提供了一种性能控制机制.在这里不打算对cgroup的作用和使用做过多的描述.本文从linux kernel的源代码出发分析cgroup机制的相关实现.在本节中,主要分析cgroup的框架实现.在后续的部份再来详细分析kernel中的几个重要的subsystem.关于cgroup的使用和介绍可以查看linux-2.6.28-rc7/Documentation/cgroups/cgroup.txt.另外,本文的源代码分析基于linux kernel 2.6.28版本.分析的源文件基本位于inux-2.6.28-rc7/kernel/cgroup.c和inux-2.6.28-rc7/kernel/debug_cgroup.c中.
二:cgroup中的概念
在深入到cgroup的代码分析之前.先来了解一下cgroup中涉及到的几个概念:
1:cgroup: 它的全称为control group.即一组进程的行为控制.比如,我们限制进程/bin/sh的CPU使用为20%.我们就可以建一个cpu占用为20%的cgroup.然后将/bin/sh进程添加到这个cgroup中.当然,一个cgroup可以有多个进程.
2:subsystem: 它类似于我们在netfilter中的过滤hook.比如上面的CPU占用率就是一个subsystem.简而言之.subsystem就是cgroup中可添加删除的模块.在cgroup架构的封装下为cgroup提供多种行为控制.subsystem在下文中简写成subsys.
3: hierarchy: 它是cgroup的集合.可以把它理解成cgroup的根.cgroup是hierarchy的结点.还是拿上面的例子: 整个cpu占用为100%.这就是根,也就是hierarchy.然后,cgroup A设置cpu占用20%,cgroup B点用50%,cgroup A和cgroup B就是它下面的子层cgroup.
三:cgroup中的重要数据结构
我们先来看cgroup的使用.有三面一个例子:
[root@localhost cgroups]# mount -t cgroup cgroup -o debug /dev/cgroup
[root@localhost cgroups]# mkdir /dev/cgroup/eric_test
如上所示,用debug subsystem做的一个测试. /dev/cgroup是debug subsys的挂载点.也就是我们在上面所分析的hierarchy.然后在hierarchy下又创建了一个名为eric_test的cgroup.
在kernel的源代码中.挂载目录,也就是cgroup的根目录用数据结构struct cgroupfs_root表示.而cgroup用struct cgroup表示.
分别来看一下这两个结构的含义,struct cgroupfs_root定义如下:
struct cgroupfs_root {
//cgroup文件系统的超级块
struct super_block *sb;
/*
* The bitmask of subsystems intended to be attached to this
* hierarchy
*/
//hierarchy相关联的subsys 位图
unsigned long subsys_bits;
/* The bitmask of subsystems currently attached to this hierarchy */
//当前hierarchy 中的subsys位图
unsigned long actual_subsys_bits;
/* A list running through the attached subsystems */
//hierarchy中的subsys链表
struct list_head subsys_list;
/* The root cgroup for this hierarchy */
//hierarchy中的顶层cgroup
struct cgroup top_cgroup;
/* Tracks how many cgroups are currently defined in hierarchy.*/
//hierarchy中cgroup的数目
int number_of_cgroups;
/* A list running through the mounted hierarchies */
//用来链入全局链表roots
struct list_head root_list;
/* Hierarchy-specific flags */
//hierarchy的标志
unsigned long flags;
/* The path to use for release notifications. */
char release_agent_path[PATH_MAX];
};
注意cgroupfs_root中有个struct cgroup结构的成员:top_cgroup.即在每个挂载点下面都会有一个总的cgroup.而通过mkdir创建的cgroup是它的子结点.
其中,release_agent_path[ ]的成员含义.我们在后面再来详细分析.
Struct cgroup的定义如下:
struct cgroup {
//cgroup的标志
unsigned long flags; /* "unsigned long" so bitops work */
/* count users of this cgroup. >0 means busy, but doesn't
* necessarily indicate the number of tasks in the
* cgroup */
//引用计数
atomic_t count;
/*
* We link our 'sibling' struct into our parent's 'children'.
* Our children link their 'sibling' into our 'children'.
*/
//用来链入父结点的children链表
struct list_head sibling; /* my parent's children */
//子结点链表
struct list_head children; /* my children */
//cgroup的父结点
struct cgroup *parent; /* my parent */
//cgroup所处的目录
struct dentry *dentry; /* cgroup fs entry */
/* Private pointers for each registered subsystem */
struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
//cgroup所属的cgroupfs_root
struct cgroupfs_root *root;
//挂载目录下的最上层cgroup
struct cgroup *top_cgroup;
……
……
}
上面并没有将cgroup的结构全部都列出来.其它的全部我们等遇到的时候再来进行分析.
其实,struct cgroupfs_root和struct cgroup就是表示了一种空间层次关系,它就对应着挂着点下面的文件示图.
在上面说过了,cgroup表示进程的行为控制.因为subsys必须要知道进程是位于哪一个cgroup.
所以.在struct task_struct和cgroup中存在一种映射.
Cgroup在struct task_struct中增加了两个成员,如下示:
struct task_struct {
……
……
#ifdef CONFIG_CGROUPS
/* Control Group info protected by css_set_lock */
struct css_set *cgroups;
/* cg_list protected by css_set_lock and tsk->alloc_lock */
struct list_head cg_list;
#endif
……
……
}
注意struct task_struct中并没有一个直接的成员指向cgroup,而是指向了css_set.css_set的结构如下:
struct css_set {
//css_set引用计数
atomic_t refcount;
//哈希指针.指向css_set_table[ ]
struct hlist_node hlist;
//与css_set关联的task链表
struct list_head tasks;
//与css_set关联的cg_cgroup_link链表
struct list_head cg_links;
//一组subsystem states.由subsys->create()创建而成
struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
}
那从css_set怎么转换到cgroup呢? 再来看一个辅助的数据结构.struct cg_cgroup_link.它的定义如下:
struct cg_cgroup_link {
/*
* List running through cg_cgroup_links associated with a
* cgroup, anchored on cgroup->css_sets
*/
struct list_head cgrp_link_list;
/*
* List running through cg_cgroup_links pointing at a
* single css_set object, anchored on css_set->cg_links
*/
struct list_head cg_link_list;
struct css_set *cg;
};
如上所示.它的cgrp_link_list链入到了cgroup->css_sets. Cg_link_list链入到css_set->cg_links.
其中.cg就是批向cg_link_list所指向的css_set.
上面分析的几个数据结构关系十分复杂.联系也十分紧密.下面以图示的方式直观将各结构的联系表示如下:
注意上图中的css_set_table[ ].它是一个哈希数组.用来存放struct css_set.它的哈希函数为css_set_hash().所有的冲突项都链入数组对应项的hlist.
四:cgroup初始化
Cgroup的初始化包括两个部份.即cgroup_init_early()和cgroup_init().分别表示在系统初始时的初始化和系统初始化完成时的初始化.分为这两个部份是因为有些subsys是要在系统刚启动的时候就必须要初始化的.
4.1: cgroup_init_early()
先看cgroup_init_early()的代码:
int __init cgroup_init_early(void)
{
int i;
//初始化全局量init_css_set
atomic_set(&init_css_set.refcount, 1);
INIT_LIST_HEAD(&init_css_set.cg_links);
INIT_LIST_HEAD(&init_css_set.tasks);
INIT_HLIST_NODE(&init_css_set.hlist);
//css_set_count:系统中struct css_set计数
css_set_count = 1;
//初始化全局变量rootnode
init_cgroup_root(&rootnode);
//将全局变量rootnode添加到roots链表
list_add(&rootnode.root_list, &roots);
root_count = 1;
//使系统的初始化进程cgroup指向init_css_set
init_task.cgroups = &init_css_set;
//将init_css_set和rootnode.top_cgroup关联起来
init_css_set_link.cg = &init_css_set;
list_add(&init_css_set_link.cgrp_link_list,
&rootnode.top_cgroup.css_sets);
list_add(&init_css_set_link.cg_link_list,
&init_css_set.cg_links);
//初始化css_set_table[ ]
for (i = 0; i < CSS_SET_TABLE_SIZE; i++)
INIT_HLIST_HEAD(&css_set_table[i]);
//对一些需要在系统启动时初始化的subsys进行初始化
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
BUG_ON(!ss->name);
BUG_ON(strlen(ss->name) > MAX_CGROUP_TYPE_NAMELEN);
BUG_ON(!ss->create);
BUG_ON(!ss->destroy);
if (ss->subsys_id != i) {
printk(KERN_ERR "cgroup: Subsys %s id == %d/n",
ss->name, ss->subsys_id);
BUG();
}
if (ss->early_init)
cgroup_init_subsys(ss);
}
return 0;
}
这里主要是初始化init_task.cgroup结构.伴随着它的初始化.相继需要初始化rootnode和init_css_set.接着,又需要初始化init_css_set_link将rootnode.top_cgroup和init_css_set关联起来.
接着初始化了哈希数组css_set_table[]并且将一些需要在系统刚启动时候需要初始化的subsys进行初始化.
从上面的代码可以看到.系统中的cgroup subsystem都存放在subsys[].定义如下:
static struct cgroup_subsys *subsys[] = {
#include <linux/cgroup_subsys.h>
}
即所有的subsys都定义在linux/cgroup_subsys.h中.
对照之前分析的数据结构,应该不难理解这段代码.下面来分析一下里面所遇到的一些重要的子函数.
Init_cgroup_root()代码如下:
static void init_cgroup_root(struct cgroupfs_root *root)
{
struct cgroup *cgrp = &root->top_cgroup;
INIT_LIST_HEAD(&root->subsys_list);
INIT_LIST_HEAD(&root->root_list);
root->number_of_cgroups = 1;
cgrp->root = root;
cgrp->top_cgroup = cgrp;
init_cgroup_housekeeping(cgrp);
}
它先初始化root中的几条链表.因为root中有一个top_cgroup.因此将root->number_of_cgroups置为1.然后,对root->top_cgroup进行初始化.使root->top_cgroup.root指向root. root->top_cgroup.top_cgroup指向它的本身.因为root->top_cgroup就是目录下的第一个cgroup.
最后在init_cgroup_housekeeping()初始化cgroup的链表和读写锁.
Cgroup_init_subsys()代码如下:
static void __init cgroup_init_subsys(struct cgroup_subsys *ss)
{
struct cgroup_subsys_state *css;
printk(KERN_INFO "Initializing cgroup subsys %s/n", ss->name);
/* Create the top cgroup state for this subsystem */
ss->root = &rootnode;
css = ss->create(ss, dummytop);
/* We don't handle early failures gracefully */
BUG_ON(IS_ERR(css));
init_cgroup_css(css, ss, dummytop);
/* Update the init_css_set to contain a subsys
* pointer to this state - since the subsystem is
* newly registered, all tasks and hence the
* init_css_set is in the subsystem's top cgroup. */
init_css_set.subsys[ss->subsys_id] = dummytop->subsys[ss->subsys_id];
need_forkexit_callback |= ss->fork || ss->exit;
need_mm_owner_callback |= !!ss->mm_owner_changed;
/* At system boot, before all subsystems have been
* registered, no tasks have been forked, so we don't
* need to invoke fork callbacks here. */
BUG_ON(!list_empty(&init_task.tasks));
ss->active = 1;
}
dummytop定义如下:
#define dummytop (&rootnode.top_cgroup)
在这个函数中:
1):将每个要注册的subsys->root都指向rootnode.
2):调用subsys->create()生成一个cgroup_subsys_state.
3):调用init_cgroup_css()将dummytop.subsys[i]设置成ss->create()生成的cgroup_subsys_state
4):更新init_css_set->subsys()对应项的值.
5):将ss->active设为1.表示它已经初始化了.
4.2: cgroup_init()
cgroup_init()是cgroup的第二阶段的初始化.代码如下:
int __init cgroup_init(void)
{
int err;
int i;
struct hlist_head *hhead;
err = bdi_init(&cgroup_backing_dev_info);
if (err)
return err;
//将剩下的(不需要在系统启动时初始化的subsys)的subsys进行初始化
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
if (!ss->early_init)
cgroup_init_subsys(ss);
}
/* Add init_css_set to the hash table */
//将init_css_set添加到css_set_table[ ]
hhead = css_set_hash(init_css_set.subsys);
hlist_add_head(&init_css_set.hlist, hhead);
//注册cgroup文件系统
err = register_filesystem(&cgroup_fs_type);
if (err < 0)
goto out;
//在proc文件系统的根目录下创建一个名为cgroups的文件
proc_create("cgroups", 0, NULL, &proc_cgroupstats_operations);
out:
if (err)
bdi_destroy(&cgroup_backing_dev_info);
return err;
}
这个函数比较简单.首先.它将剩余的subsys初始化.然后将init_css_set添加进哈希数组css_set_table[ ]中.在上面的代码中css_set_hash()是css_set_table的哈希函数.它是css_set->subsys为哈希键值,到css_set_table[ ]中找到对应项.然后调用hlist_add_head()将init_css_set添加到冲突项中.
然后,注册了cgroup文件系统.这个文件系统也是我们在用户空间使用cgroup时必须挂载的.
最后,在proc的根目录下创建了一个名为cgroups的文件.用来从用户空间观察cgroup的状态.
经过cgroup的两个阶段的初始化, init_css_set, rootnode,subsys已经都初始化完成.表面上看起来它们很复杂,其实,它们只是表示cgroup的初始化状态而已.例如,如果subsys->root等于rootnode,那表示subsys没有被其它的cgroup所使用.
五:父子进程之间的cgroup关联
在上面看到的代码中.将init_task.cgroup设置为了init_css_set.我们知道,init_task是系统的第一个进程.所有的过程都是由它创建的.init_task.cgroup到底会在它后面的子进程造成什么样的影响呢?接下来我们就来分析这个问题.
5.1:创建进程时的父子进程cgroup关联
在进程创建的时候,有:do_fork()àcopy_process(),有如下代码片段:
static struct task_struct *copy_process(unsigned long clone_flags,
unsigned long stack_start,
struct pt_regs *regs,
unsigned long stack_size,
int __user *child_tidptr,
struct pid *pid,
int trace)
{
……
……
cgroup_fork(p);
……
cgroup_fork_callbacks(p);
……
cgroup_post_fork(p);
……
}
上面的代码片段是创建新进程的时候与cgroup关联的函数.挨个分析如下:
void cgroup_fork(struct task_struct *child)
{
task_lock(current);
child->cgroups = current->cgroups;
get_css_set(child->cgroups);
task_unlock(current);
INIT_LIST_HEAD(&child->cg_list);
}
如上面代码所示,子进程和父进程指向同一个cgroups.并且由于增加了一次引用.所以要调用get_css_set()来增加它的引用计数.最后初始化child->cg_list链表.
如代码注释上说的,这里就有一个问题了:在dup_task_struct()为子进程创建struct task_struct的时候不是已经复制了父进程的cgroups么?为什么这里还要对它进行一次赋值呢?这里因为在dup_task_struct()中没有持有保护锁.而这里又是一个竞争操作.因为在cgroup_attach_task()中可能会更改进程的cgroups指向.因此通过cgroup_attach_task()所得到的cgroups可能是一个无效的指向.在递增其引用计数的时候就会因为它是一个无效的引用而发生错误.所以,这个函数在加锁的情况下进行操作.确保了父子进程之间的同步.
cgroup_fork_callbacks()代码如下,
void cgroup_fork_callbacks(struct task_struct *child)
{
if (need_forkexit_callback) {
int i;
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
if (ss->fork)
ss->fork(ss, child);
}
}
}
它主要是在进程创建时调用subsys中的跟踪函数:subsys->fork().
首先来跟踪一下need_forkexita_callback这个变量.在如下代码片段中:
static void __init cgroup_init_subsys(struct cgroup_subsys *ss)
{
……
need_forkexit_callback |= ss->fork || ss->exit;
……
}
从这段代码中我们可以看到,如果有subsys定义了fork和exit函数,就会调need_forkexit_callback设置为1.
回到cgroup_fork_callback()这个函数中.我们发现.进程会跟所有定义了fork的subsys进行这次操作.就算进程没有在这个subsys中,也会有这个操作.
Cgroup_pos_fork()如下所示:
void cgroup_post_fork(struct task_struct *child)
{
if (use_task_css_set_links) {
write_lock(&css_set_lock);
if (list_empty(&child->cg_list))
list_add(&child->cg_list, &child->cgroups->tasks);
write_unlock(&css_set_lock);
}
在use_task_css_set_link为1的情况下.就将子进程链入到它所指向的css_set->task链表.
那什么时候会将use_task_css_set_link设置为1呢?实际上,当你往cgroup中添加进程的时候就会将其置1了.
例如我们之前举的一个例子中:
echo $$ > /dev/cgroup/eric_task/tasks
这个过程就会将use_task_css_set_link置1了.这个过程我们之后再来详细分析.
5.2:子进程结束时的操作
子进程结束的时候,有:
Do_exit() à cgroup_exit().
Cgroup_exit()代码如下:
void cgroup_exit(struct task_struct *tsk, int run_callbacks)
{
int i;
struct css_set *cg;
if (run_callbacks && need_forkexit_callback) {
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
if (ss->exit)
ss->exit(ss, tsk);
}
}
/*
* Unlink from the css_set task list if necessary.
* Optimistically check cg_list before taking
* css_set_lock
*/
if (!list_empty(&tsk->cg_list)) {
write_lock(&css_set_lock);
if (!list_empty(&tsk->cg_list))
list_del(&tsk->cg_list);
write_unlock(&css_set_lock);
}
/* Reassign the task to the init_css_set. */
task_lock(tsk);
cg = tsk->cgroups;
tsk->cgroups = &init_css_set;
task_unlock(tsk);
if (cg)
put_css_set_taskexit(cg);
}
这个函数的代码逻辑比较清晰.首先,如果以1为调用参数(run_callbacks为1),且有定义了exit操作的subsys.就调用这个subsys的exit操作.
然后断开task->cg_list链表.将其从所指向的css_set->task链上断开.
最后,断开当前的cgroup指向.将其指向init_css_set.也就是将其回复到初始状态.最后,减少旧指向css_set的引用计数.
在这个函数中,我们来跟踪分析put_css_set_taskexit(),代码如下:
static inline void put_css_set_taskexit(struct css_set *cg)
{
__put_css_set(cg, 1);
}
跟踪到__put_css_set()中:
static void __put_css_set(struct css_set *cg, int taskexit)
{
int i;
/*
* Ensure that the refcount doesn't hit zero while any readers
* can see it. Similar to atomic_dec_and_lock(), but for an
* rwlock
*/
if (atomic_add_unless(&cg->refcount, -1, 1))
return;
write_lock(&css_set_lock);
if (!atomic_dec_and_test(&cg->refcount)) {
write_unlock(&css_set_lock);
return;
}
unlink_css_set(cg);
write_unlock(&css_set_lock);
rcu_read_lock();
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup *cgrp = cg->subsys[i]->cgroup;
if (atomic_dec_and_test(&cgrp->count) &&
notify_on_release(cgrp)) {
if (taskexit)
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
}
rcu_read_unlock();
kfree(cg);
}
atomic_add_unless(v,a,u)表示如果v的值不为u就加a.返回1.如果v的值等于u就返回0
因此,这个函数首先减小css_set的引用计数.如果css_set的引用计数为1.就会将css_set释放掉了. 要释放css_set.首先要释放css_set上挂载的链表.再释放css_set结构本身所占空间.
释放css_set上的挂载链表是在unlink_css_set()中完成的.代码如下:
static void unlink_css_set(struct css_set *cg)
{
struct cg_cgroup_link *link;
struct cg_cgroup_link *saved_link;
hlist_del(&cg->hlist);
css_set_count--;
list_for_each_entry_safe(link, saved_link, &cg->cg_links,
cg_link_list) {
list_del(&link->cg_link_list);
list_del(&link->cgrp_link_list);
kfree(link);
}
}
它首先将cg->hlist断开,也就是将其从css_set_table[ ]中删除.然后减小css_set_count计数.最后遍历删除与css_set关联的cg_cgroup_link.
另外,在这个函数中还涉及到了notify_on_release的操作.在后面再来详细分析这一过程.这里先把它放一下.
六:cgroup文件系统的挂载
Cgroup文件系统定义如下:
static struct file_system_type cgroup_fs_type = {
.name = "cgroup",
.get_sb = cgroup_get_sb,
.kill_sb = cgroup_kill_sb,
}
根据我们之前有关linux文件系统系列的文析.在挂载文件系统的时候,流程会流入file_system_type.get_sb().也就是cgroup_get_sb().由于该代码较长.分段分析如下:
static int cgroup_get_sb(struct file_system_type *fs_type,
int flags, const char *unused_dev_name,
void *data, struct vfsmount *mnt)
{
struct cgroup_sb_opts opts;
int ret = 0;
struct super_block *sb;
struct cgroupfs_root *root;
struct list_head tmp_cg_links;
/* First find the desired set of subsystems */
//解析挂载参数
ret = parse_cgroupfs_options(data, &opts);
if (ret) {
if (opts.release_agent)
kfree(opts.release_agent);
return ret;
}
在这一部份,解析挂载的参数,并将解析的结果存放到opts.opts-> subsys_bits表示指定关联的subsys位图,opts->flags:挂载的标志: opts->release_agent表示指定的release_agent路径.
//分配并初始化cgroufs_root
root = kzalloc(sizeof(*root), GFP_KERNEL);
if (!root) {
if (opts.release_agent)
kfree(opts.release_agent);
return -ENOMEM;
}
init_cgroup_root(root);
/*root->subsys_bits: 该hierarchy上关联的subsys*/
root->subsys_bits = opts.subsys_bits;
root->flags = opts.flags;
/*如果带了release_agent参数,将其copy到root0<release_agent_path*/
if (opts.release_agent) {
strcpy(root->release_agent_path, opts.release_agent);
kfree(opts.release_agent);
}
/*初始化一个super block*/
sb = sget(fs_type, cgroup_test_super, cgroup_set_super, root);
/*如果发生错误*/
if (IS_ERR(sb)) {
kfree(root);
return PTR_ERR(sb);
}
在这一部份,主要分配并初始化了一个cgroupfs_root结构.里面的子函数init_cgroup_root()我们在之前已经分析过,这里不再赘述.其实的初始化包括:设置与之关联的subsys位图,挂载标志和release_agent路径.然后再调用sget()生成一个super_block结构.调用cgroup_test_super来判断系统中是否有机同的cgroups_root.调用cgroup_set_super来对super_block进行初始化.
在cgroup_set_super()中,将sb->s_fs_info 指向了cgroutfs_root,cgroufs_root.sb指向生成的super_block.
类似的.如果找到的super_block相关联的cgroupfs_root所表示的subsys_bits和flags与当前cgroupfs_root相同的话,就表示是一个相同的super_block.因为它们的挂载参数是一样的.
举个例子来说明一下有重复super_block的情况:
[root@localhost ~]# mount -t cgroup cgroup -o debug /dev/cgroup/
[root@localhost ~]# mount -t cgroup cgroup -o debug /dev/eric_cgroup/
在上面的例子中,在挂载到/dev/eric_cgroup目录的时候,就会找到一个相同的super_block.这样实例上两者的操作是一样的.这两个不同挂载点所代码的vfsmount会找到同一个super_block.也就是说对其中一个目录的操作都会同表现在另一个目录中.
/*重复挂载*/
if (sb->s_fs_info != root) {
/* Reusing an existing superblock */
BUG_ON(sb->s_root == NULL);
kfree(root);
root = NULL;
} else {
/* New superblock */
struct cgroup *cgrp = &root->top_cgroup;
struct inode *inode;
int i;
BUG_ON(sb->s_root != NULL);
/*初始化super_block对应的dentry和inode*/
ret = cgroup_get_rootdir(sb);
if (ret)
goto drop_new_super;
inode = sb->s_root->d_inode;
mutex_lock(&inode->i_mutex);
mutex_lock(&cgroup_mutex);
/*
* We're accessing css_set_count without locking
* css_set_lock here, but that's OK - it can only be
* increased by someone holding cgroup_lock, and
* that's us. The worst that can happen is that we
* have some link structures left over
*/
/*分配css_set_count个cg_cgroup_link并将它们链入到tmp_cg_links*/
ret = allocate_cg_links(css_set_count, &tmp_cg_links);
if (ret) {
mutex_unlock(&cgroup_mutex);
mutex_unlock(&inode->i_mutex);
goto drop_new_super;
}
/*bind subsys 到hierarchy*/
ret = rebind_subsystems(root, root->subsys_bits);
if (ret == -EBUSY) {
mutex_unlock(&cgroup_mutex);
mutex_unlock(&inode->i_mutex);
goto drop_new_super;
}
/* EBUSY should be the only error here */
BUG_ON(ret);
/*将root添加到roots链入.增加root_count计数*/
list_add(&root->root_list, &roots);
root_count++;
/*将挂载根目录dentry的私有结构d_fsdata反映向root->top_cgroup*/
/*将root->top_cgroup.dentry指向挂载的根目录*/
sb->s_root->d_fsdata = &root->top_cgroup;
root->top_cgroup.dentry = sb->s_root;
/* Link the top cgroup in this hierarchy into all
* the css_set objects */
/*将所有的css_set都和root->top_cgroup关联起来*/
write_lock(&css_set_lock);
for (i = 0; i < CSS_SET_TABLE_SIZE; i++) {
struct hlist_head *hhead = &css_set_table[i];
struct hlist_node *node;
struct css_set *cg;
hlist_for_each_entry(cg, node, hhead, hlist) {
struct cg_cgroup_link *link;
BUG_ON(list_empty(&tmp_cg_links));
link = list_entry(tmp_cg_links.next,
struct cg_cgroup_link,
cgrp_link_list);
list_del(&link->cgrp_link_list);
link->cg = cg;
list_add(&link->cgrp_link_list,
&root->top_cgroup.css_sets);
list_add(&link->cg_link_list, &cg->cg_links);
}
}
write_unlock(&css_set_lock);
/*释放tmp_cg_links的多余项*/
free_cg_links(&tmp_cg_links);
BUG_ON(!list_empty(&cgrp->sibling));
BUG_ON(!list_empty(&cgrp->children));
BUG_ON(root->number_of_cgroups != 1);
/*在root->top_cgroup下面创建一些文件,包括cgroup共有的和subsys私有的文件*/
cgroup_populate_dir(cgrp);
mutex_unlock(&inode->i_mutex);
mutex_unlock(&cgroup_mutex);
}
/*将vfsmount和super_block关联起来*/
return simple_set_mnt(mnt, sb);
drop_new_super:
up_write(&sb->s_umount);
deactivate_super(sb);
free_cg_links(&tmp_cg_links);
return ret;
}
这一部份,首先判断找到的super_block是不是之前就存在的.如果是已经存在的,那就用不着再初始化一个cgroupfs_root结构了.将之前分配的结构释放掉.然后调用simple_set_mnt()将取得的super_block和vfsmount相关联后退出.
如果super_block是一个新建的.那么就必须要继续初始化cgroupfs_root了.
首先,调用cgroup_get_rootdir()初始化super_block对应的dentry和inode.
然后,调用rebind_subsystems()将需要关联到hierarchy的subsys和root->top_cgroup绑定起来.
最后,将所有的css_set都和root->top_cgroup关联起来.这样就可以从root->top_cgroup找到所有的进程了.再调用cgroup_populate_dir()在挂载目录下创建一些文件,然后,调用simple_set_mnt()将取得的super_block和vfsmount相关联后退出.
这个函数的流程还算简单.下面来分析一下里面涉及到的重要的子函数:
6.1: parse_cgroupfs_options()函数分析
这个函数主要是对挂载的参数进行解析.函数代码如下:
static int parse_cgroupfs_options(char *data,
struct cgroup_sb_opts *opts)
{
/*如果挂载的时候没有带参数,将o设为"all".表示将所有
*的subsys都与之关联
*/
char *token, *o = data ?: "all";
opts->subsys_bits = 0;
opts->flags = 0;
opts->release_agent = NULL;
/*各参数是以","分隔的*/
while ((token = strsep(&o, ",")) != NULL) {
if (!*token)
return -EINVAL;
/*如果为all.表示关联所有的subsys*/
if (!strcmp(token, "all")) {
/* Add all non-disabled subsystems */
int i;
opts->subsys_bits = 0;
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
if (!ss->disabled)
opts->subsys_bits |= 1ul << i;
}
}
/*如果指定参数noprefix.设定ROOT_NOPREFIX标志*/
/*在指定noprefix的情况下.subsys创建的文件不会带subsys名称的前缀*/
else if (!strcmp(token, "noprefix")) {
set_bit(ROOT_NOPREFIX, &opts->flags);
}
/*如果指定了release_agent.分opt->release_agent分配内存,并将参数copy到里面*/
else if (!strncmp(token, "release_agent=", 14)) {
/* Specifying two release agents is forbidden */
if (opts->release_agent)
return -EINVAL;
opts->release_agent = kzalloc(PATH_MAX, GFP_KERNEL);
if (!opts->release_agent)
return -ENOMEM;
strncpy(opts->release_agent, token + 14, PATH_MAX - 1);
opts->release_agent[PATH_MAX - 1] = 0;
}
/*其它情况下,将所带参数做为一个susys名处理.到sussys[]找到
*对应的subsys.然后将opts->subsys_bits中的位置1
*/
else {
struct cgroup_subsys *ss;
int i;
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
ss = subsys[i];
if (!strcmp(token, ss->name)) {
if (!ss->disabled)
set_bit(i, &opts->subsys_bits);
break;
}
}
if (i == CGROUP_SUBSYS_COUNT)
return -ENOENT;
}
}
/* We can't have an empty hierarchy */
/*如果没有关联到subsys.错误*/
if (!opts->subsys_bits)
return -EINVAL;
return 0;
}
对照代码中添加的注释应该很容易看懂.这里就不再做详细分析了.
6.2: rebind_subsystems()函数分析
rebind_subsystems()用来将cgroupfs_root和subsys绑定.代码如下:
static int rebind_subsystems(struct cgroupfs_root *root,
unsigned long final_bits)
{
unsigned long added_bits, removed_bits;
struct cgroup *cgrp = &root->top_cgroup;
int i;
/*root->actual_subsys_bits表示当进root中所关键的subsys位图*/
/*如果在root->actual_subsys_bits中.但没有在final_bits中.表示这是
*一次remonut的操作.需要将旧的subsys移除.如果在final_bits中
*存在,但没有在root->actual_subsys_bits中,表示是需要添加的.
*/
removed_bits = root->actual_subsys_bits & ~final_bits;
added_bits = final_bits & ~root->actual_subsys_bits;
/* Check that any added subsystems are currently free */
/*如果要关联的subsys已经在其它的hierarchy中了.失败.
*如果ss->root != &rootnode表示ss已经链入了其它的cgroupfs_root
*/
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
unsigned long bit = 1UL << i;
struct cgroup_subsys *ss = subsys[i];
if (!(bit & added_bits))
continue;
if (ss->root != &rootnode) {
/* Subsystem isn't free */
return -EBUSY;
}
}
/* Currently we don't handle adding/removing subsystems when
* any child cgroups exist. This is theoretically supportable
* but involves complex error handling, so it's being left until
* later */
/*如果root->top_cgroup->children不为空.表示该hierarchy还要其它的cgroup
*是不能被remount的.(新挂载的root->top_cgroup在初始化的时候将children置空了)
*/
if (!list_empty(&cgrp->children))
return -EBUSY;
/* Process each subsystem */
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
unsigned long bit = 1UL << i;
/*添加subsys的情况*/
if (bit & added_bits) {
/* We're binding this subsystem to this hierarchy */
/* 添加情况下.将cgrp->subsys[i]指向dummytop->subsys[i]
* 并更新dummytop->subsys[i]->root.将其指向要添加的root
* 最后调用subsys->bind()操作
*/
BUG_ON(cgrp->subsys[i]);
BUG_ON(!dummytop->subsys[i]);
BUG_ON(dummytop->subsys[i]->cgroup != dummytop);
cgrp->subsys[i] = dummytop->subsys[i];
cgrp->subsys[i]->cgroup = cgrp;
list_add(&ss->sibling, &root->subsys_list);
rcu_assign_pointer(ss->root, root);
if (ss->bind)
ss->bind(ss, cgrp);
}
/*移除subsys的情况*/
else if (bit & removed_bits) {
/* 移除操作,将对应的cgroup_subsys_state回归到原来的样子.并且也需要
* 将与其subsys bind
*/
/* We're removing this subsystem */
BUG_ON(cgrp->subsys[i] != dummytop->subsys[i]);
BUG_ON(cgrp->subsys[i]->cgroup != cgrp);
if (ss->bind)
ss->bind(ss, dummytop);
dummytop->subsys[i]->cgroup = dummytop;
cgrp->subsys[i] = NULL;
rcu_assign_pointer(subsys[i]->root, &rootnode);
list_del(&ss->sibling);
} else if (bit & final_bits) {
/* Subsystem state should already exist */
BUG_ON(!cgrp->subsys[i]);
} else {
/* Subsystem state shouldn't exist */
BUG_ON(cgrp->subsys[i]);
}
}
/*更新root的位图*/
root->subsys_bits = root->actual_subsys_bits = final_bits;
synchronize_rcu();
return 0;
}
从这个函数也可以看出来.rootnode就是起一个参照的作用.用来判断subsys是否处于初始化状态.
6.3: cgroup_populate_dir()函数分析
cgroup_populate_dir()用来在挂载目录下创建交互文件.代码如下:
static int cgroup_populate_dir(struct cgroup *cgrp)
{
int err;
struct cgroup_subsys *ss;
/* First clear out any existing files */
/*先将cgrp所在的目录清空*/
cgroup_clear_directory(cgrp->dentry);
/*创建files所代码的几个文件*/
err = cgroup_add_files(cgrp, NULL, files, ARRAY_SIZE(files));
if (err < 0)
return err;
/*如果是顶层top_cgroup.创建cft_release_agent所代码的文件*/
if (cgrp == cgrp->top_cgroup) {
if ((err = cgroup_add_file(cgrp, NULL, &cft_release_agent)) < 0)
return err;
}
/*对所有与cgrp->root关联的subsys都调用populate()*/
for_each_subsys(cgrp->root, ss) {
if (ss->populate && (err = ss->populate(ss, cgrp)) < 0)
return err;
}
return 0;
}
这个函数比较简单.跟踪cgroup_add_file().如下:
nt cgroup_add_file(struct cgroup *cgrp,
struct cgroup_subsys *subsys,
const struct cftype *cft)
{
struct dentry *dir = cgrp->dentry;
struct dentry *dentry;
int error;
char name[MAX_CGROUP_TYPE_NAMELEN + MAX_CFTYPE_NAME + 2] = { 0 };
/*如果有指定subsys.且没有使用ROOT_NOPREFIX标志.需要在名称前加上
*subsys的名称
*/
if (subsys && !test_bit(ROOT_NOPREFIX, &cgrp->root->flags)) {
strcpy(name, subsys->name);
strcat(name, ".");
}
/*将cft->name链接到name代表的字串后面*/
strcat(name, cft->name);
BUG_ON(!mutex_is_locked(&dir->d_inode->i_mutex));
/*到cgroup所在的目录下寻找name所表示的dentry,如果不存在,则新建之*/
dentry = lookup_one_len(name, dir, strlen(name));
if (!IS_ERR(dentry)) {
/*创建文件inode*/
error = cgroup_create_file(dentry, 0644 | S_IFREG,
cgrp->root->sb);
/*使dentry->d_fsdata指向文件所代表的cftype*/
if (!error)
dentry->d_fsdata = (void *)cft;
dput(dentry);
} else
error = PTR_ERR(dentry);
return error;
}
cgroup_create_file()函数代码如下:
static int cgroup_create_file(struct dentry *dentry, int mode,
struct super_block *sb)
{
static struct dentry_operations cgroup_dops = {
.d_iput = cgroup_diput,
};
struct inode *inode;
if (!dentry)
return -ENOENT;
if (dentry->d_inode)
return -EEXIST;
/*分配一个inode*/
inode = cgroup_new_inode(mode, sb);
if (!inode)
return -ENOMEM;
/*如果新建的是目录*/
if (S_ISDIR(mode)) {
inode->i_op = &cgroup_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
/* start off with i_nlink == 2 (for "." entry) */
inc_nlink(inode);
/* start with the directory inode held, so that we can
* populate it without racing with another mkdir */
mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
}
/*新建一般文件*/
else if (S_ISREG(mode)) {
inode->i_size = 0;
inode->i_fop = &cgroup_file_operations;
}
dentry->d_op = &cgroup_dops;
/*将dentry和inode关联起来*/
d_instantiate(dentry, inode);
dget(dentry); /* Extra count - pin the dentry in core */
return 0;
}
从这个函数我们可以看到.如果是目录的话,对应的操作集为simple_dir_operations和cgroup_dir_inode_operations.它与cgroup_get_rootdir()中对根目录对应的inode所设置的操作集是一样的.如果是一般文件,它的操作集为cgroup_file_operations.
在这里,先将cgroup中的文件操作放到一边,我们在之后再来详细分析这个过程.
现在.我们已经将cgroup文件系统的挂载分析完成.接下来看它下面子层cgroup的创建.
七:创建子层cgroup
在目录下通过mkdir调用就可以创建一个子层cgroup.下面就分析这一过程:
经过上面的分析可以得知,cgroup中目录的操作集为: cgroup_dir_inode_operations.结构如下:
static struct inode_operations cgroup_dir_inode_operations = {
.lookup = simple_lookup,
.mkdir = cgroup_mkdir,
.rmdir = cgroup_rmdir,
.rename = cgroup_rename,
};
从上面看到,对应mkdir的入口为cgroup_mkdir().代码如下:
static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
/*找到它的上一级cgroup*/
struct cgroup *c_parent = dentry->d_parent->d_fsdata;
/* the vfs holds inode->i_mutex already */
/*调用cgroup_create创建cgroup*/
return cgroup_create(c_parent, dentry, mode | S_IFDIR);
}
跟踪cgroup_create().代码如下:
static long cgroup_create(struct cgroup *parent, struct dentry *dentry,
int mode)
{
struct cgroup *cgrp;
struct cgroupfs_root *root = parent->root;
int err = 0;
struct cgroup_subsys *ss;
struct super_block *sb = root->sb;
/*分配并初始化一个cgroup*/
cgrp = kzalloc(sizeof(*cgrp), GFP_KERNEL);
if (!cgrp)
return -ENOMEM;
/* Grab a reference on the superblock so the hierarchy doesn't
* get deleted on unmount if there are child cgroups. This
* can be done outside cgroup_mutex, since the sb can't
* disappear while someone has an open control file on the
* fs */
atomic_inc(&sb->s_active);
mutex_lock(&cgroup_mutex);
init_cgroup_housekeeping(cgrp);
/*设置cgrp的层次关系*/
cgrp->parent = parent;
cgrp->root = parent->root;
cgrp->top_cgroup = parent->top_cgroup;
/*如果上一级cgroup设置了CGRP_NOTIFY_ON_RELEASE.那cgrp也设置这个标志*/
if (notify_on_release(parent))
set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
/*调用subsys_create()生成cgroup_subsys_state.并与cgrp相关联*/
for_each_subsys(root, ss) {
struct cgroup_subsys_state *css = ss->create(ss, cgrp);
if (IS_ERR(css)) {
err = PTR_ERR(css);
goto err_destroy;
}
init_cgroup_css(css, ss, cgrp);
}
/*将cgrp添加到上一层cgroup的children链表*/
list_add(&cgrp->sibling, &cgrp->parent->children);
/*增加root的cgroups数目计数*/
root->number_of_cgroups++;
/*在当前目录生成一个目录*/
err = cgroup_create_dir(cgrp, dentry, mode);
if (err < 0)
goto err_remove;
/* The cgroup directory was pre-locked for us */
BUG_ON(!mutex_is_locked(&cgrp->dentry->d_inode->i_mutex));
/*在cgrp下创建几个交互文件*/
err = cgroup_populate_dir(cgrp);
/* If err < 0, we have a half-filled directory - oh well ;) */
mutex_unlock(&cgroup_mutex);
mutex_unlock(&cgrp->dentry->d_inode->i_mutex);
return 0;
err_remove:
list_del(&cgrp->sibling);
root->number_of_cgroups--;
err_destroy:
for_each_subsys(root, ss) {
if (cgrp->subsys[ss->subsys_id])
ss->destroy(ss, cgrp);
}
mutex_unlock(&cgroup_mutex);
/* Release the reference count that we took on the superblock */
deactivate_super(sb);
kfree(cgrp);
return err;
}
在这个函数中,主要分配并初始化了一个cgroup结构.并且将它和它的上一层目录以及整个cgroupfs_root构成一个空间层次关系.然后,再调用subsys>create()操作函数.来让subsys知道已经创建了一个cgroup结构.
为了理顺这一部份.将前面分析的cgroup文件系统挂载和cgroup的创建.以及接下来要分析的attach_task()操作总结成一个图.如下示:
八:cgroup中文件的操作
接下来,就来看cgroup文件的操作.在上面曾分析到:文件对应的操作集为cgroup_file_operations.如下所示:
static struct file_operations cgroup_file_operations = {
.read = cgroup_file_read,
.write = cgroup_file_write,
.llseek = generic_file_llseek,
.open = cgroup_file_open,
.release = cgroup_file_release,
}
7.1:cgrou文件的open操作
对应的函数为cgroup_file_open().代码如下:
static int cgroup_file_open(struct inode *inode, struct file *file)
{
int err;
struct cftype *cft;
err = generic_file_open(inode, file);
if (err)
return err;
/*取得文件对应的struct cftype*/
cft = __d_cft(file->f_dentry);
if (!cft)
return -ENODEV;
/*如果定义了read_map或者是read_seq_string*/
if (cft->read_map || cft->read_seq_string) {
struct cgroup_seqfile_state *state =
kzalloc(sizeof(*state), GFP_USER);
if (!state)
return -ENOMEM;
state->cft = cft;
state->cgroup = __d_cgrp(file->f_dentry->d_parent);
file->f_op = &cgroup_seqfile_operations;
err = single_open(file, cgroup_seqfile_show, state);
if (err < 0)
kfree(state);
}
/*否则调用cft->open()*/
else if (cft->open)
err = cft->open(inode, file);
else
err = 0;
return err;
}
有两种情况.一种是定义了read_map或者是read_seq_string的情况.这种情况下,它对应的操作集为cgroup_seqfile_operations.如果是其它的情况.调用cftype的open()函数.第一种情况,我们等以后遇到了这样的情况再来详细分析.
7.2:cgroup文件的read操作
对应函数为cgroup_file_read().代码如下:
static ssize_t cgroup_file_read(struct file *file, char __user *buf,
size_t nbytes, loff_t *ppos)
{
struct cftype *cft = __d_cft(file->f_dentry);
struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
if (!cft || cgroup_is_removed(cgrp))
return -ENODEV;
if (cft->read)
return cft->read(cgrp, cft, file, buf, nbytes, ppos);
if (cft->read_u64)
return cgroup_read_u64(cgrp, cft, file, buf, nbytes, ppos);
if (cft->read_s64)
return cgroup_read_s64(cgrp, cft, file, buf, nbytes, ppos);
return -EINVAL;
}
如上代码所示.read操作会转入到cftype的read()或者read_u64或者read_s64的函数中.
7.3:cgroup文件的wirte操作
对应的操作函数是cgroup_file_write().如下示:
static ssize_t cgroup_file_write(struct file *file, const char __user *buf,
size_t nbytes, loff_t *ppos)
{
struct cftype *cft = __d_cft(file->f_dentry);
struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
if (!cft || cgroup_is_removed(cgrp))
return -ENODEV;
if (cft->write)
return cft->write(cgrp, cft, file, buf, nbytes, ppos);
if (cft->write_u64 || cft->write_s64)
return cgroup_write_X64(cgrp, cft, file, buf, nbytes, ppos);
if (cft->write_string)
return cgroup_write_string(cgrp, cft, file, buf, nbytes, ppos);
if (cft->trigger) {
int ret = cft->trigger(cgrp, (unsigned int)cft->private);
return ret ? ret : nbytes;
}
return -EINVAL;
}
从上面可以看到.最终的操作会转入到cftype的write或者wirte_u64或者wirte_string或者trigger函数中.
7.4:debug subsytem分析
以debug subsystem为例来说明cgroup中的文件操作
Debug subsys定义如下:
struct cgroup_subsys debug_subsys = {
.name = "debug",
.create = debug_create,
.destroy = debug_destroy,
.populate = debug_populate,
.subsys_id = debug_subsys_id,
}
在cgroup_init_subsys()中,会以dummytop为参数调用debug.create().对应函数为debug_create().代码如下:
static struct cgroup_subsys_state *debug_create(struct cgroup_subsys *ss,
struct cgroup *cont)
{
struct cgroup_subsys_state *css = kzalloc(sizeof(*css), GFP_KERNEL);
if (!css)
return ERR_PTR(-ENOMEM);
return css;
}
这里没啥好说的,就是分配了一个cgroup_subsys_state结构.
然后,将cgroup挂载.指令如下:
[root@localhost ~]# mount -t cgroup cgroup -o debug /dev/cgroup/
在rebind_subsystems()中,会调用subsys的bind函数.但在debug中无此接口.故不需要考虑.
然后在cgroup_populate_dir()中会调用populate接口.对应函数为debug_populate().代码如下:
static int debug_populate(struct cgroup_subsys *ss, struct cgroup *cont)
{
return cgroup_add_files(cont, ss, files, ARRAY_SIZE(files));
}
Debug中的files定义如下:
static struct cftype files[] = {
{
.name = "cgroup_refcount",
.read_u64 = cgroup_refcount_read,
},
{
.name = "taskcount",
.read_u64 = taskcount_read,
},
{
.name = "current_css_set",
.read_u64 = current_css_set_read,
},
{
.name = "current_css_set_refcount",
.read_u64 = current_css_set_refcount_read,
},
{
.name = "releasable",
.read_u64 = releasable_read,
},
}
来观察一下 /dev/cgroup下的文件:
[root@localhost ~]# tree /dev/cgroup/
/dev/cgroup/
|-- debug.cgroup_refcount
|-- debug.current_css_set
|-- debug.current_css_set_refcount
|-- debug.releasable
|-- debug.taskcount
|-- notify_on_release
|-- release_agent
`-- tasks
0 directories, 8 files
上面带debug字样的文件是从debug subsys中创建的.其它的是cgroup.c的files中创建的.
我们先来分析每一个subsys共有的文件.即tasks,release_agent和notify_on_release.
7.5:task文件操作
Tasks文件对应的cftype结构如下:
static struct cftype files[] = {
{
.name = "tasks",
.open = cgroup_tasks_open,
.write_u64 = cgroup_tasks_write,
.release = cgroup_tasks_release,
.private = FILE_TASKLIST,
}
7.5.1:task文件的open操作
当打开文件时,流程就会转入cgroup_tasks_open().代码如下:
static int cgroup_tasks_open(struct inode *unused, struct file *file)
{
/*取得该文件所在层次的cgroup*/
struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
pid_t *pidarray;
int npids;
int retval;
/* Nothing to do for write-only files */
/*如果是只写的文件系统*/
if (!(file->f_mode & FMODE_READ))
return 0;
/*
* If cgroup gets more users after we read count, we won't have
* enough space - tough. This race is indistinguishable to the
* caller from the case that the additional cgroup users didn't
* show up until sometime later on.
*/
/*得到该层cgroup所关联的进程个数*/
npids = cgroup_task_count(cgrp);
/*为npids个进程的pid存放分配空间*/
pidarray = kmalloc(npids * sizeof(pid_t), GFP_KERNEL);
if (!pidarray)
return -ENOMEM;
/* 将与cgroup关联进程的pid存放到pid_array_load数组.
* 并且按照从小到大的顺序排列
*/
npids = pid_array_load(pidarray, npids, cgrp);
sort(pidarray, npids, sizeof(pid_t), cmppid, NULL);
/*
* Store the array in the cgroup, freeing the old
* array if necessary
*/
/* 将npids,pidarray信息存放到cgroup中.如果cgroup之前
* 就有task_pids.将其占放的空间释放
*/
down_write(&cgrp->pids_mutex);
kfree(cgrp->tasks_pids);
cgrp->tasks_pids = pidarray;
cgrp->pids_length = npids;
cgrp->pids_use_count++;
up_write(&cgrp->pids_mutex);
/*将文件对应的操作集更改为cgroup_task_operations*/
file->f_op = &cgroup_tasks_operations;
retval = seq_open(file, &cgroup_tasks_seq_operations);
/*如果操作失败,将cgroup中的pid信息释放*/
if (retval) {
release_cgroup_pid_array(cgrp);
return retval;
}
((struct seq_file *)file->private_data)->private = cgrp;
return 0;
}
首先,我们来思考一下这个问题:怎么得到与cgroup关联的进程呢?
回到在上面列出来的数据结构关系图.每个进程都会指向一个css_set.而与这个css_set关联的所有进程都会链入到css_set->tasks链表.而cgroup又可能通过一个中间结构cg_cgroup_link来寻找所有与之关联的所有css_set.从而可以得到与cgroup关联的所有进程.
在上面的代码中,通过调用cgroup_task_count()来得到与之关联的进程数目,代码如下:
int cgroup_task_count(const struct cgroup *cgrp)
{
int count = 0;
struct cg_cgroup_link *link;
read_lock(&css_set_lock);
list_for_each_entry(link, &cgrp->css_sets, cgrp_link_list) {
count += atomic_read(&link->cg->refcount);
}
read_unlock(&css_set_lock);
return count;
}
它就是遍历cgro->css_sets.并调其转换为cg_cgroup_link.再从这个link得到css_set.这个css_set的引用计数就是与这个指向这个css_set的task数目.
在代码中,是通过pid_array_load()来得到与cgroup关联的task,并且将进程的pid写入数组pidarray中.代码如下:
static int pid_array_load(pid_t *pidarray, int npids, struct cgroup *cgrp)
{
int n = 0;
struct cgroup_iter it;
struct task_struct *tsk;
cgroup_iter_start(cgrp, &it);
while ((tsk = cgroup_iter_next(cgrp, &it))) {
if (unlikely(n == npids))
break;
pidarray[n++] = task_pid_vnr(tsk);
}
cgroup_iter_end(cgrp, &it);
return n;
}
我们在这里遇到了一个新的结构:struct cgroup_iter.它是cgroup的一个迭代器,通过它可以遍历取得与cgroup关联的task.它的使用方法为:
1:调用cgroup_iter_start()来初始化这个迭代码.
2:调用cgroup_iter_next()用来取得cgroup中的下一个task
3:使用完了,调用cgroup_iner_end().
下面来分析这三个过程:
Cgroup_iter_start()代码如下:
void cgroup_iter_start(struct cgroup *cgrp, struct cgroup_iter *it)
{
/*
* The first time anyone tries to iterate across a cgroup,
* we need to enable the list linking each css_set to its
* tasks, and fix up all existing tasks.
*/
if (!use_task_css_set_links)
cgroup_enable_task_cg_lists();
read_lock(&css_set_lock);
it->cg_link = &cgrp->css_sets;
cgroup_advance_iter(cgrp, it);
}
我们在这里再次遇到了use_task_css_set_links变量.在之前分析cgroup_post_fork()中的时候,我们曾说过,只有在use_task_css_set_link设置为1的时候,才会调task->cg_list链入到css_set->tasks中.
所以,在这个地方,如果use_task_css_set_link为0.那就必须要将之前所有的进程都链入到它所指向的css_set->tasks链表.这个过程是在cgroup_enable_task_cg_lists()完成的,这个函数相当简单,就是一个task的遍历,然后就是链表的链入,在这里就不再详细分析了.请自行阅读它的代码.*^_^*
然后,将it->cg_link指向cgrp->css_sets.我们在前面说过,可以通过cgrp->css_sets就可以得得所有的与cgroup关联的css_set.
到这里,这个迭代器里面还是空的,接下来往里面填充数据.这个过程是在cgroup_advance_iter()中完成,代码如下示:
static void cgroup_advance_iter(struct cgroup *cgrp,
struct cgroup_iter *it)
{
struct list_head *l = it->cg_link;
struct cg_cgroup_link *link;
struct css_set *cg;
/* Advance to the next non-empty css_set */
do {
l = l->next;
if (l == &cgrp->css_sets) {
it->cg_link = NULL;
return;
}
link = list_entry(l, struct cg_cgroup_link, cgrp_link_list);
cg = link->cg;
} while (list_empty(&cg->tasks));
it->cg_link = l;
it->task = cg->tasks.next;
}
通过前面的分析可得知,可通过it->cg_link找到与之关联的css_set,然后再通过css_set找到与它关联的task链表.因此每次往cgroup迭代器里填充数据,就是找到一个tasks链表不为空的css_set.取数据就从css_set->tasks中取.如果数据取完了,就找下一个tasks链表不为空的css_set.
这样,这个函数的代码就很简单了.它就是找到it->cg_link上tasks链表不为空的css_set项.
cgroup_iter_next()的代码如下:
struct task_struct *cgroup_iter_next(struct cgroup *cgrp,
struct cgroup_iter *it)
{
struct task_struct *res;
struct list_head *l = it->task;
/* If the iterator cg is NULL, we have no tasks */
if (!it->cg_link)
return NULL;
res = list_entry(l, struct task_struct, cg_list);
/* Advance iterator to find next entry */
l = l->next;
if (l == &res->cgroups->tasks) {
/* We reached the end of this task list - move on to
* the next cg_cgroup_link */
cgroup_advance_iter(cgrp, it);
} else {
it->task = l;
}
return res;
}
如果it->cg_link为空表示it->cg_link已经遍历完了,也就不存放在task了.否则,从it->task中取得task.如果已经是最后一个task就必须要调用cgroup_advance_iter()填充迭代器里面的数据.最后将取得的task返回.
cgroup_iter_end()用来对迭代码进行收尾的工作,代码如下:
void cgroup_iter_end(struct cgroup *cgrp, struct cgroup_iter *it)
{
read_unlock(&css_set_lock);
}
它就是释放了在cgroup_iter_start()中持有的锁.
回到cgroup_tasks_open()中.我们接下来会遇到kernel为sequential file提供的一组接口.首先在代码遇到的是seq_open().代码如下:
int seq_open(struct file *file, const struct seq_operations *op)
{
struct seq_file *p = file->private_data;
if (!p) {
p = kmalloc(sizeof(*p), GFP_KERNEL);
if (!p)
return -ENOMEM;
file->private_data = p;
}
memset(p, 0, sizeof(*p));
mutex_init(&p->lock);
p->op = op;
file->f_version = 0;
/* SEQ files support lseek, but not pread/pwrite */
file->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
return 0;
}
从代码中可以看出,它就是初始化了一个struct seq_file结构.并且将其关联到file->private_data.在这里要注意将seq_file->op设置成了参数op.在我们分析的这个情景中,也就是cgroup_tasks_seq_operations.这个在我们分析文件的读操作的时候会用到的.
7.5.2:task文件的read操作
从上面的代码中可看到.在open的时候,更改了file->f_op.将其指向了cgroup_tasks_operations.该结构如下:
static struct file_operations cgroup_tasks_operations = {
.read = seq_read,
.llseek = seq_lseek,
.write = cgroup_file_write,
.release = cgroup_tasks_release,
}
相应的,read操作就会转入到seq_read()中.由于该函数篇幅较大,这里就不列出了.感兴趣的可以自己跟踪看一下,其它就是循环调用seq_file->op->start() à seq_file->op->show() à seq_file->op->next() à seq_file->op->stop()的过程.
我们在上面分析task文件的open操作的时候,曾经提配过,seq_file->op被指向了cgroup_tasks_seq_operations.定义如下:
static struct seq_operations cgroup_tasks_seq_operations = {
.start = cgroup_tasks_start,
.stop = cgroup_tasks_stop,
.next = cgroup_tasks_next,
.show = cgroup_tasks_show,
}
Cgroup_tasks_start()代码如下:
static void *cgroup_tasks_start(struct seq_file *s, loff_t *pos)
{
/*
* Initially we receive a position value that corresponds to
* one more than the last pid shown (or 0 on the first call or
* after a seek to the start). Use a binary-search to find the
* next pid to display, if any
*/
struct cgroup *cgrp = s->private;
int index = 0, pid = *pos;
int *iter;
down_read(&cgrp->pids_mutex);
if (pid) {
int end = cgrp->pids_length;
while (index < end) {
int mid = (index + end) / 2;
if (cgrp->tasks_pids[mid] == pid) {
index = mid;
break;
} else if (cgrp->tasks_pids[mid] <= pid)
index = mid + 1;
else
end = mid;
}
}
/* If we're off the end of the array, we're done */
if (index >= cgrp->pids_length)
return NULL;
/* Update the abstract position to be the actual pid that we found */
iter = cgrp->tasks_pids + index;
*pos = *iter;
return iter;
}
它以二分法从cgrp->tasks_pids[ ]中去寻找第一个大于或者等于参数*pos值的项.如果找到了,返回该项.如果没找到.返回NULL.
cgroup_tasks_show()代码如下:
static int cgroup_tasks_show(struct seq_file *s, void *v)
{
return seq_printf(s, "%d/n", *(int *)v);
}
它就是将pid转换为了字符串.
cgroup_tasks_next()就是找到数组中的下一项.代码如下:
static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos)
{
struct cgroup *cgrp = s->private;
int *p = v;
int *end = cgrp->tasks_pids + cgrp->pids_length;
/*
* Advance to the next pid in the array. If this goes off the
* end, we're done
*/
p++;
if (p >= end) {
return NULL;
} else {
*pos = *p;
return p;
}
}
cgroup_tasks_stop()代码如下:
static void cgroup_tasks_stop(struct seq_file *s, void *v)
{
struct cgroup *cgrp = s->private;
up_read(&cgrp->pids_mutex);
}
它只是释放了在cgroup_tasks_start()中持有的读写锁.
7.5.3:task文件的close操作
Task文件close时,调用的相应接口为cgroup_tasks_release().代码如下:
static int cgroup_tasks_release(struct inode *inode, struct file *file)
{
struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
if (!(file->f_mode & FMODE_READ))
return 0;
release_cgroup_pid_array(cgrp);
return seq_release(inode, file);
}
它就是将cgroup中的pid信息与seqfile信息释放掉.
到这里,我们已经分析完了task文件的open,read,close操作.我们现在就可以实现一下,看上面的分析是否正确.
在前面已经分析中cgroupfs_root.top_cgroup会将系统中的所有css_set与之关联起来,那么通过cgroupfs_root_top_cgroup找到的进程应该是系统当前的所有进程.那么相应的,在挂载目录的task文件的内容.应该是系统中所有进程的pid.
如下所示:
[root@localhost cgroup]# cat tasks
1
2
3
………
………
2578
其实,这样做是cgroup子系统开发者特意设置的.它表示所有的进程都在hierarchy的控制之下.
反过来,当我们在挂载目录mkdir一个目录,它下面的task文件内容应该是空的.因为在mkdir后,它对应的cgroup并没有关联任何task.
如下所示:
[root@localhost cgroup]# mkdir eric
[root@localhost cgroup]# cat eric/tasks
[root@localhost cgroup]#
下面我们来看一下task文件的写操作,也就是怎样将进程添加进cgroup.
7.5.4:task文件的write操作
根据上面的文件,可得知task文件的write操作对应的函数为int cgroup_tasks_write().代码如下:
static int cgroup_tasks_write(struct cgroup *cgrp, struct cftype *cft, u64 pid)
{
int ret;
/*如果cgroup已经被移除了,非法*/
if (!cgroup_lock_live_group(cgrp))
return -ENODEV;
/*将PID为pid的进程与cgroup关联*/
ret = attach_task_by_pid(cgrp, pid);
cgroup_unlock();
return ret;
}
Attach_task_by_pid()的代码如下:
static int attach_task_by_pid(struct cgroup *cgrp, u64 pid)
{
struct task_struct *tsk;
int ret;
/*如果pid不为0.寻找PID为pid的task.并增加其引用计数*/
if (pid) {
rcu_read_lock();
tsk = find_task_by_vpid(pid);
if (!tsk || tsk->flags & PF_EXITING) {
rcu_read_unlock();
return -ESRCH;
}
get_task_struct(tsk);
rcu_read_unlock();
if ((current->euid) && (current->euid != tsk->uid)
&& (current->euid != tsk->suid)) {
put_task_struct(tsk);
return -EACCES;
}
}
/*如果pid为0.表示是将当前进程添加进cgroup*/
else {
tsk = current;
get_task_struct(tsk);
}
/*将cgroup与task相关联*/
ret = cgroup_attach_task(cgrp, tsk);
/*操作完成,减少其引用计数*/
put_task_struct(tsk);
return ret;
}
如果写入的是一个不这0的数,表示的是进程的PID值.如果是写入0,表示是将当前进程.这个操作的核心操作是cgroup_attach_task().代码如下:
int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
{
int retval = 0;
struct cgroup_subsys *ss;
struct cgroup *oldcgrp;
struct css_set *cg = tsk->cgroups;
struct css_set *newcg;
struct cgroupfs_root *root = cgrp->root;
int subsys_id;
/*得到与cgroup关联的第一个subsys的序号*/
get_first_subsys(cgrp, NULL, &subsys_id);
/* Nothing to do if the task is already in that cgroup */
/*找到这个进程之前所属的cgroup*/
oldcgrp = task_cgroup(tsk, subsys_id);
/*如果已经在这个cgrp里面了.*/
if (cgrp == oldcgrp)
return 0;
/* 遍历与hierarchy关联的subsys
* 如果subsys定义了can_attach函数,就调用它
*/
for_each_subsys(root, ss) {
if (ss->can_attach) {
retval = ss->can_attach(ss, cgrp, tsk);
if (retval)
return retval;
}
}
/*
* Locate or allocate a new css_set for this task,
* based on its final set of cgroups
*/
/*找到这个task所关联的css_set.如果不存在,则新建一个*/
newcg = find_css_set(cg, cgrp);
if (!newcg)
return -ENOMEM;
task_lock(tsk);
/*如果task正在执行exit操作*/
if (tsk->flags & PF_EXITING) {
task_unlock(tsk);
put_css_set(newcg);
return -ESRCH;
}
/*将tak->cgroup指向这个css_set*/
rcu_assign_pointer(tsk->cgroups, newcg);
task_unlock(tsk);
/* Update the css_set linked lists if we're using them */
/*更改task->cg_list*/
write_lock(&css_set_lock);
if (!list_empty(&tsk->cg_list)) {
list_del(&tsk->cg_list);
list_add(&tsk->cg_list, &newcg->tasks);
}
write_unlock(&css_set_lock);
/* 遍历与hierarchy关联的subsys
* 如果subsys定义了attach 函数,就调用它
*/
for_each_subsys(root, ss) {
if (ss->attach)
ss->attach(ss, cgrp, oldcgrp, tsk);
}
set_bit(CGRP_RELEASABLE, &oldcgrp->flags);
synchronize_rcu();
/*减小旧指向的引用计数*/
put_css_set(cg);
return 0;
}
这个函数逻辑很清楚,它就是初始化task->cgroup.然后将它和subsys相关联.可自行参照代码中的注释进行分析.这里就不再赘述了.
在这里,详细分析一下find_css_set()函数,这个函数有点意思.代码如下:
static struct css_set *find_css_set(
struct css_set *oldcg, struct cgroup *cgrp)
{
struct css_set *res;
struct cgroup_subsys_state *template[CGROUP_SUBSYS_COUNT];
int i;
struct list_head tmp_cg_links;
struct cg_cgroup_link *link;
struct hlist_head *hhead;
/* First see if we already have a cgroup group that matches
* the desired set */
read_lock(&css_set_lock);
/*寻找从oldcg转换为cgrp的css_set.如果不存在,返回NULL */
res = find_existing_css_set(oldcg, cgrp, template);
/*如果css_set已经存在,增加其引用计数后退出*/
if (res)
get_css_set(res);
read_unlock(&css_set_lock);
if (res)
return res;
这一部份,先从哈希数组中搜索从oldcg转换cgrp的css_set.如果不存在,返回NULL.如果在哈希数组中存放,增加其引用计数返回即可.
Find_existing_css_set()的代码如下:
static struct css_set *find_existing_css_set(
struct css_set *oldcg,
struct cgroup *cgrp,
struct cgroup_subsys_state *template[])
{
int i;
struct cgroupfs_root *root = cgrp->root;
struct hlist_head *hhead;
struct hlist_node *node;
struct css_set *cg;
/* Built the set of subsystem state objects that we want to
* see in the new css_set */
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
if (root->subsys_bits & (1UL << i)) {
/* Subsystem is in this hierarchy. So we want
* the subsystem state from the new
* cgroup */
template[i] = cgrp->subsys[i];
} else {
/* Subsystem is not in this hierarchy, so we
* don't want to change the subsystem state */
template[i] = oldcg->subsys[i];
}
}
hhead = css_set_hash(template);
hlist_for_each_entry(cg, node, hhead, hlist) {
if (!memcmp(template, cg->subsys, sizeof(cg->subsys))) {
/* All subsystems matched */
return cg;
}
}
/* No existing cgroup group matched */
return NULL;
}
如果subsys与新的cgroup相关联,那么它指向新的cgroup->subsys[]中的对应项.否则指向旧的cgrop的对应项.这样做主要是因为,该进程可能还被关联在其它的hierarchy中.所以要保持它在其它hierarchy中的信息.
最后,在css_set_table[ ]中寻找看是否有与template相等的项.有的话返回该项.如果没有.返回NULL.
/*分配一个css_set*/
res = kmalloc(sizeof(*res), GFP_KERNEL);
if (!res)
return NULL;
/* Allocate all the cg_cgroup_link objects that we'll need */
/*分配root_count项cg_cgroup_link*/
if (allocate_cg_links(root_count, &tmp_cg_links) < 0) {
kfree(res);
return NULL;
}
/* 初始化刚分配的css_set */
atomic_set(&res->refcount, 1);
INIT_LIST_HEAD(&res->cg_links);
INIT_LIST_HEAD(&res->tasks);
INIT_HLIST_NODE(&res->hlist);
/* Copy the set of subsystem state objects generated in
* find_existing_css_set() */
/*设置css_set->subsys*/
memcpy(res->subsys, template, sizeof(res->subsys));
运行到这里的话.表示没有从css_set_table[ ]中找到相应项.因此需要分配并初始化一个css_set结构.并且设置css_set的subsys域.
write_lock(&css_set_lock);
/* Add reference counts and links from the new css_set. */
/*遍历所有的subsys以及css_set 中的subsys[ ].
*建立task所在的cgroup到css_set的引用
*/
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup *cgrp = res->subsys[i]->cgroup;
struct cgroup_subsys *ss = subsys[i];
atomic_inc(&cgrp->count);
/*
* We want to add a link once per cgroup, so we
* only do it for the first subsystem in each
* hierarchy
*/
if (ss->root->subsys_list.next == &ss->sibling) {
BUG_ON(list_empty(&tmp_cg_links));
link = list_entry(tmp_cg_links.next,
struct cg_cgroup_link,
cgrp_link_list);
list_del(&link->cgrp_link_list);
list_add(&link->cgrp_link_list, &cgrp->css_sets);
link->cg = res;
list_add(&link->cg_link_list, &res->cg_links);
}
}
/*似乎没有地方会更改rootnode.subsys_list.?这里的判断大部份情况是满足的*/
if (list_empty(&rootnode.subsys_list)) {
/*建立这个css_set到dumytop的引用*/
/* 这样做,是为了让新建的hierarchy能够关联到所有的进程*/
link = list_entry(tmp_cg_links.next,
struct cg_cgroup_link,
cgrp_link_list);
list_del(&link->cgrp_link_list);
list_add(&link->cgrp_link_list, &dummytop->css_sets);
link->cg = res;
list_add(&link->cg_link_list, &res->cg_links);
}
BUG_ON(!list_empty(&tmp_cg_links));
这一部份的关键操作都在代码中添加了相应的注释.如果系统中存在多个hierarchy.那么这个进程肯定也位于其它的hierarchy所对应的cgroup中.因此需要在新分配的css_set中保存这些信息,也就是建立从cgroup到css_set的引用.
另外,关于ist_empty(&rootnode.subsys_list)的操作.似乎没看到有什么地方会更改rootnode.subsys_list.不过,如果rootnode.subsys_list不为空的话,也会在它前面的for循环中检测出来.
总而言之.系统中有root_count个hierarchy.上述的引用保存过程就会进行root_count次.因此.到最后.tmp_cg_links肯定会空了.如果不为空.说明某处发生了错误.
/*增加css_set计数*/
css_set_count++;
/* Add this cgroup group to the hash table */
/*将其添加到全局哈希数组: css_set_table[ ]*/
hhead = css_set_hash(res->subsys);
hlist_add_head(&res->hlist, hhead);
write_unlock(&css_set_lock);
return res;
}
最后,将生成的css_set添加到哈希数组css_set_table[ ]中.
到这里,task文件的操作已经分析完了.
7.6: notify_on_release文件操作
notify_on_release文件对应的cftype结构如下:
{
.name = "notify_on_release",
.read_u64 = cgroup_read_notify_on_release,
.write_u64 = cgroup_write_notify_on_release,
.private = FILE_NOTIFY_ON_RELEASE,
}
从此得知.文件的读操作接口为cgroup_read_notify_on_release().代码如下:
static u64 cgroup_read_notify_on_release(struct cgroup *cgrp,
struct cftype *cft)
{
return notify_on_release(cgrp);
}
继续跟进notify_on_release().如下示:
static int notify_on_release(const struct cgroup *cgrp)
{
return test_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
}
从此可以看到,如果当前cgroup设置了CGRP_NOTIFY_ON_RELEASE标志.就会返回1.否则.就是为0.
从当前系统中测试一下,如下:
[root@localhost cgroup]# cat notify_on_release
0
[root@localhost cgroup]#
文件内容为零.因为top_cgroup上没有设置CGRP_NOTIFY_ON_RELEASE的标志.
notify_on_release文件读操作接口为cgroup_write_notify_on_release().代码如下:
static int cgroup_write_notify_on_release(struct cgroup *cgrp,
struct cftype *cft,
u64 val)
{
clear_bit(CGRP_RELEASABLE, &cgrp->flags);
if (val)
set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
else
clear_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
return 0;
}
从上面的代码可以看到.如果我们写入的是1.就会设置cgroup标志的CGRP_NOTIFY_ON_RELEASE位.否则.清除CGRP_NOTIFY_ON_RELEASE位.测试如下:
[root@localhost cgroup]# echo 1 > notify_on_release
[root@localhost cgroup]# cat notify_on_release
1
[root@localhost cgroup]# echo 0 > notify_on_release
[root@localhost cgroup]# cat notify_on_release
0
[root@localhost cgroup]#
7.7: release_agent文件操作
release_agent只有在顶层目录才会有.它所代表的cftype结构如下:
static struct cftype cft_release_agent = {
.name = "release_agent",
.read_seq_string = cgroup_release_agent_show,
.write_string = cgroup_release_agent_write,
.max_write_len = PATH_MAX,
.private = FILE_RELEASE_AGENT,
};
由此可以看到.读文件的接口为cgroup_release_agent_show.代码如下:
static int cgroup_release_agent_show(struct cgroup *cgrp, struct cftype *cft,
struct seq_file *seq)
{
if (!cgroup_lock_live_group(cgrp))
return -ENODEV;
seq_puts(seq, cgrp->root->release_agent_path);
seq_putc(seq, '/n');
cgroup_unlock();
return 0;
}
从代码中可以看到.就是打印出root的release_agent_path.
写文件的接口为cgroup_release_agent_write().如下示:
static int cgroup_release_agent_write(struct cgroup *cgrp, struct cftype *cft,
const char *buffer)
{
BUILD_BUG_ON(sizeof(cgrp->root->release_agent_path) < PATH_MAX);
if (!cgroup_lock_live_group(cgrp))
return -ENODEV;
strcpy(cgrp->root->release_agent_path, buffer);
cgroup_unlock();
return 0;
}
由此得知.往这个文件中写内容,就是设置root的release_agent_path.如下做个测试:
[root@localhost cgroup]# cat release_agent
[root@localhost cgroup]# echo /bin/ls > release_agent
[root@localhost cgroup]# cat release_agent
/bin/ls
[root@localhost cgroup]#
7.8:debug创建的文件分析
下面分析一下debug subsys中的文件.由于我们挂载的时候没有带noprefix.因为.debug生成的文件都带了一个”debug_”前缀.由debug创建的文件如下示:
debug.cgroup_refcount debug.current_css_set_refcount debug.taskcount debug.current_css_set debug.releasable
挨个分析如下:
7.8.1: cgroup_refcount文件操作
Cgroup_refcount所代表的cftype结构如下示:
{
.name = "cgroup_refcount",
.read_u64 = cgroup_refcount_read,
},
可以看到,该文件不能写,只能读.读操作接口为cgroup_refcount_read().代码如下:
static u64 cgroup_refcount_read(struct cgroup *cont, struct cftype *cft)
{
return atomic_read(&cont->count);
}
它就是显示出当前cgroup的引用计数.
测试如下:
[root@localhost cgroup]# cat debug.cgroup_refcount
0
[root@localhost cgroup]#
顶层的cgroup是位于cgroupfs_root.top_cgroup.它的引用计数为0.
接下来,我们在下层创建一个子层cgroup.如下示:
[root@localhost cgroup]# mkdir /dev/cgroup/eric
[root@localhost cgroup]# cat /dev/cgroup/eric/debug.cgroup_refcount
0
[root@localhost cgroup]#
可见创建子层cgroup不会增加其引用计数.因为它只是与它的上一层cgroup构成指针指向关系.
现在我们让子层cgroup关联一个进程
[root@localhost cgroup]# echo 1673 > /dev/cgroup/eric/tasks
[root@localhost cgroup]# cat /dev/cgroup/eric/debug.cgroup_refcount
1
[root@localhost cgroup]#
可以看到.它的计数比为了1.这里在关联进程的css_set和所在的cgroup时增加的.
7.8.2: current_css_set文件操作
current_css_set对应的cftype结构如下示:
{
.name = "current_css_set",
.read_u64 = current_css_set_read,
},
可看出.它也是一个只读的.读接口为current_css_set_read().代码如下:
static u64 current_css_set_read(struct cgroup *cont, struct cftype *cft)
{
return (u64)(long)current->cgroups;
}
它就是显示了当前进程关联的css_set的地址.
测试如下:
[root@localhost cgroup]# cat debug.current_css_set
18446744072645980768
7.8.3: current_css_set_refcount文件操作
current_css_set_refcount文件对应的ctype结构如下:
{
.name = "current_css_set_refcount",
.read_u64 = current_css_set_refcount_read,
},
照例.它也是只读的.接口如下:
static u64 current_css_set_refcount_read(struct cgroup *cont,
struct cftype *cft)
{
u64 count;
rcu_read_lock();
count = atomic_read(&current->cgroups->refcount);
rcu_read_unlock();
return count;
}
它就是显示出与当前进程关联的css_set的引用计数.
测试如下:
[root@localhost cgroup]# cat debug.current_css_set_refcount
56
表示已经有56个进程关联到这个css_set了.
7.8.3: taskcount文件操作
Taskcount文件对应cftype结构如下:
{
.name = "taskcount",
.read_u64 = taskcount_read,
},
只读文件.接口如下:
static u64 taskcount_read(struct cgroup *cont, struct cftype *cft)
{
u64 count;
cgroup_lock();
count = cgroup_task_count(cont);
cgroup_unlock();
return count;
}
其中,子函数cgroup_task_count()我们在之前已经分析过了.它就是计算与当前cgroup关联的进程数目.这里就不再分析了.测试如下:
[root@localhost cgroup]# cat debug.taskcount
56
7.8.4: releasable文件操作
Releasable文件对应的ctype结构如下示:
{
.name = "releasable",
.read_u64 = releasable_read,
},
只读,读接口代码如下:
static u64 releasable_read(struct cgroup *cgrp, struct cftype *cft)
{
return test_bit(CGRP_RELEASABLE, &cgrp->flags);
}
它用来查看当前cgroup是否有CGRP_RELEASABLE标志.如果有.显示为1.否则显示为0.
测试如下:
[root@localhost cgroup]# cat debug.releasable
0
经过上面的分析.可以知道.如果往cgroup中删除一个关联进程,就会将其设置CGRP_RELEASABLE标志.有下面测试:
[root@localhost cgroup]# mkdir eric
[root@localhost cgroup]# cat eric/debug.releasable
0
[root@localhost cgroup]# echo 1650 > eric/tasks
[root@localhost cgroup]# echo 1701 > eric/tasks
[root@localhost cgroup]# cat eric/debug.releasable
0
[root@localhost cgroup]# echo 1650 >tasks
[root@localhost cgroup]# cat eric/debug.releasable
1
到这里为止,各subsys共有的文件和debug中的文件操作就已经分析完了.其它的subsys远远比debug要复杂.之后再给出专题分析.详情请关注本站更新.*^_^*
九: notify_on_release操作
下面我们来分析在之前一直在忽略的一个问题.也就是涉及到CGRP_NOTIFY_ON_RELEASE标志和root-> release_agent_path[]部份.
它的重用,就是在cgroup中最后的一个进程离开(包括进程退出.进程关联到其它同类型的cgroup),或者是在最后一个子层cgroup被移除的时候.就会调用用户空间的一个程序.这个程序的路径是在root-> release_agent_path[]中指定的.
下面我们从代码的角度来跟踪一下.
9.1:进程退出
我们在之前在分析父子进程之间的cgroup关系的时候.忽略掉了__put_css_set函数中的一个部份.现在是时候来剥开它了.
次__put_css_set()被忽略的代码片段列出,如下:
static void __put_css_set(struct css_set *cg, int taskexit)
{
......
......
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup *cgrp = cg->subsys[i]->cgroup;
if (atomic_dec_and_test(&cgrp->count) &&
notify_on_release(cgrp)) {
if (taskexit)
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
}
......
......
}
首先,进程退出时,调用__put_css_set时.taskexit参数是为1的,因此在这里,它会将cgroup的flag的CGRP_RELEASABLE位置1.
atomic_dec_and_test(&cgrp->count)返回为真的话,说明进程所属的cgroup中已经没有其它的进程了.因此即将要退出的子进程就是cgroup中的最后一个进程.
notify_on_release(cgrp)代码如下:
static int notify_on_release(const struct cgroup *cgrp)
{
return test_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
}
它用来判断cgroup有没有设定CGRP_NOTIFY_ON_RELEASE标志
综合上面的分析.如果cgroup中最后一个进程退出.且cgroup设定了CGRP_NOTIFY_ON_RELEASE标志.流程就会转到check_for_release()中.该函数代码如下:
static void check_for_release(struct cgroup *cgrp)
{
/* All of these checks rely on RCU to keep the cgroup
* structure alive */
if (cgroup_is_releasable(cgrp) && !atomic_read(&cgrp->count)
&& list_empty(&cgrp->children) && !cgroup_has_css_refs(cgrp)) {
/* Control Group is currently removeable. If it's not
* already queued for a userspace notification, queue
* it now */
int need_schedule_work = 0;
spin_lock(&release_list_lock);
if (!cgroup_is_removed(cgrp) &&
list_empty(&cgrp->release_list)) {
list_add(&cgrp->release_list, &release_list);
need_schedule_work = 1;
}
spin_unlock(&release_list_lock);
if (need_schedule_work)
schedule_work(&release_agent_work);
}
}
首先,在这里必须要满足以下四个条件才能继续下去:
1:cgroup_is_releasable()返回1.
代码如下:
static int cgroup_is_releasable(const struct cgroup *cgrp)
{
const int bits =
(1 << CGRP_RELEASABLE) |
(1 << CGRP_NOTIFY_ON_RELEASE);
return (cgrp->flags & bits) == bits;
}
它表示当前cgroup是含含有CGRP_RELEASABLE和CGRP_NOTIFY_ON_RELEASE标志.结合我们在上面分析的. CGRP_RELEASABLE标志是进程在退出是就会设置的.
2:cgroup的引用计数为0
3:cgroup没有子层cgroup
4: cgroup_has_css_refs()返回0.代码如下:
static int cgroup_has_css_refs(struct cgroup *cgrp)
{
int i;
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
struct cgroup_subsys_state *css;
/* Skip subsystems not in this hierarchy */
if (ss->root != cgrp->root)
continue;
css = cgrp->subsys[ss->subsys_id];
if (css && atomic_read(&css->refcnt))
return 1;
}
return 0;
}
也就是说,cgroup关联的css_set引用计数必须要为0
满足上面几个条件之后.就说明该cgroup是可以释放的.因此将cgroup链接到了release_list.接着调度了工作队列.在工作队列中会完成余下的工作.
下面跟踪看看这个工作队列是怎么处理余下任务的.
release_agent_work定义如下:
static DECLARE_WORK(release_agent_work, cgroup_release_agent);
该工作队列对应的处理函数为cgroup_release_agent().代码如下:
static void cgroup_release_agent(struct work_struct *work)
{
BUG_ON(work != &release_agent_work);
mutex_lock(&cgroup_mutex);
spin_lock(&release_list_lock);
/*遍历链表,直到其为空*/
while (!list_empty(&release_list)) {
char *argv[3], *envp[3];
int i;
char *pathbuf = NULL, *agentbuf = NULL;
/*取得链表项对应的cgroup*/
struct cgroup *cgrp = list_entry(release_list.next,
struct cgroup,
release_list);
/*将cgroup从release_list中断开*/
list_del_init(&cgrp->release_list);
spin_unlock(&release_list_lock);
/*将cgroup的路径存放到pathbuf中*/
pathbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!pathbuf)
goto continue_free;
if (cgroup_path(cgrp, pathbuf, PAGE_SIZE) < 0)
goto continue_free;
/*agentbuf存放release_agent_path的内容*/
agentbuf = kstrdup(cgrp->root->release_agent_path, GFP_KERNEL);
if (!agentbuf)
goto continue_free;
/*初始化运行参数和环境变量*/
i = 0;
argv[i++] = agentbuf;
argv[i++] = pathbuf;
argv[i] = NULL;
i = 0;
/* minimal command environment */
envp[i++] = "HOME=/";
envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
envp[i] = NULL;
/* Drop the lock while we invoke the usermode helper,
* since the exec could involve hitting disk and hence
* be a slow process */
/*调用用户空间的进程*/
mutex_unlock(&cgroup_mutex);
call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
mutex_lock(&cgroup_mutex);
continue_free:
kfree(pathbuf);
kfree(agentbuf);
spin_lock(&release_list_lock);
}
spin_unlock(&release_list_lock);
mutex_unlock(&cgroup_mutex);
}
该函数遍历release_list中的cgroup.然后以其路径做为参数.调用root->release_agent_path对应的程序.
我们来做如下的实验:
为了配合这次实验.必须要写两个测试的程序.代码如下:
Test.c
#include <stdio.h>
#include <stdlib.h>
main()
{
int i = 30;
while(i){
i--;
sleep(1);
}
}
这个进程睡眠30s之后退出.编译成test
另外一个程序代码如下:
Main.c
#include <stdio.h>
#include <stdlib.h>
int main(int argc,char *argv[])
{
char buf[125] = "";
int i = 0;
sprintf(buf,"rm -f /var/eric_test");
system(buf);
while(i < argc){
sprintf(buf,"echo %s >> /var/eric_test",argv[i]);
system(buf);
i++;
}
}
它就是将调用参数输出到/var/eric_test下面.
下面就可以开始我们的测试了.挂载目录下已经有一个子层cgroup.如下示:
.
|-- debug.cgroup_refcount
|-- debug.current_css_set
|-- debug.current_css_set_refcount
|-- debug.releasable
|-- debug.taskcount
|-- eric
| |-- debug.cgroup_refcount
| |-- debug.current_css_set
| |-- debug.current_css_set_refcount
| |-- debug.releasable
| |-- debug.taskcount
| |-- notify_on_release
| `-- tasks
|-- notify_on_release
|-- release_agent
`-- tasks
接下来设置realesse_agent_path和CGRP_NOTIFY_ON_RELEASE标志,指令如下:
[root@localhost cgroup]# echo /root/main > release_agent
[root@localhost cgroup]# echo 1 > eric/notify_on_release
下面往子层cgroup中添加一个进程.指令如下:
[root@localhost cgroup]# /root/test &
[1] 4350
[root@localhost cgroup]# echo 4350 > eric/tasks
[root@localhost cgroup]#
[1]+ Done /root/test
等/root/test运行完之后.就会进行notify_on_release的操作了.印证一下:
[root@localhost cgroup]# cat /var/eric_test
/root/main
/eric
一切都如我们上面分析的一样
9.2:取消进程与cgroup的关联
当cgroup中的最后一个进程取消关联的时候,也会有notify_on_release过程.见下面的代码片段:
int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
{
int retval = 0;
struct cgroup_subsys *ss;
struct cgroup *oldcgrp;
struct css_set *cg = tsk->cgroups;
......
......
set_bit(CGRP_RELEASABLE, &oldcgrp->flags);
synchronize_rcu();
put_css_set(cg);
}
这个函数我们在之前分析过,不过也把notify_on_release的过程去掉了.现在也把它加上.
代码中的cg是指向进程原本所引用的css_set
Oldcgrp是过程之前所在的cgroup
在代码中,会将oldcgrp标志设为CGRP_RELEASABLE.之后也会调用put_css_set().put_css_set()就是我们在上面分析的过程了.如果cgroup为空的话,就会产生notify_on_release的操作.
同样做个测试:
接着上面的测试环境.我们先来看下环境下的相关文件内容:
[root@localhost cgroup]# cat release_agent
/root/main
[root@localhost cgroup]# cat eric/tasks
[root@localhost cgroup]# cat eric/notify_on_release
1
[root@localhost cgroup]# pwd
/dev/cgroup
好了,测试开始了:
[root@localhost cgroup]# rm -rf /var/eric_test
[root@localhost cgroup]# echo 1701 > eric/tasks
[root@localhost cgroup]# echo 1701 >tasks
[root@localhost cgroup]# cat /var/eric_test
/root/main
/eric
在上面的测试过程中.为了避免影响测试效果.先将/var/eric_test文件删了.然后将进程1701关联到eric所表示的cgroup.然后再把1701再加最上层cgroup.这样就会造成eric下关联进程为空.相应的会发生notify_on_release过程.上面的测试也印证了这一说话.
9.3:移除cgroup
当移除cgroup下的最后一个子层cgroup时.也会发生notify_on_release.
看一下移除cgroup时的代码片段:
static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry)
{
......
......
set_bit(CGRP_RELEASABLE, &parent->flags);
check_for_release(parent);
......
}
代码中,parent表示cgroup的上一层.在移除cgroup时,会设置上一层的cgroup标志的CGRP_RELEASABLE位.然后流程同样会转入到check_for_release().这样,如果上一层cgroup是空的话.就会生notify_on_release操作了.
测试如下:
还是用上层的测试环境.先来看一下初始环境:
[root@localhost cgroup]# pwd
/dev/cgroup
[root@localhost cgroup]# cat release_agent
/root/main
[root@localhost cgroup]# cat eric/notify_on_release
1
在eric下面再加一层cgroup.
[root@localhost cgroup]# mkdir eric/test
[root@localhost cgroup]# tree
.
|-- debug.cgroup_refcount
|-- debug.current_css_set
|-- debug.current_css_set_refcount
|-- debug.releasable
|-- debug.taskcount
|-- eric
| |-- debug.cgroup_refcount
| |-- debug.current_css_set
| |-- debug.current_css_set_refcount
| |-- debug.releasable
| |-- debug.taskcount
| |-- notify_on_release
| |-- tasks
| `-- test
| |-- debug.cgroup_refcount
| |-- debug.current_css_set
| |-- debug.current_css_set_refcount
| |-- debug.releasable
| |-- debug.taskcount
| |-- notify_on_release
| `-- tasks
|-- notify_on_release
|-- release_agent
`-- tasks
2 directories, 22 files
接着运行如下指令:
[root@localhost cgroup]# rm -rf /var/eric_test
[root@localhost cgroup]# rmdir eric/test/
[root@localhost cgroup]# cat /var/eric_test
/root/main
/eric
如上所示.把eric下的唯一一个cgroup移除的时候.就发生了notity_on_release过程.
十:cgroup的proc节点
10.1:/proce/cgroups
在前面分析cgroup初始化的时候.在cgroup_init()中有下面代码片段:
int __init cgroup_init(void)
{
......
......
proc_create("cgroups", 0, NULL, &proc_cgroupstats_operations)
......
......
}
也就是说.会在proc根目录下创建一个名为cgroups的文件.如下示:
[root@localhost cgroup]# ls /proc/cgroups
/proc/cgroups
接下来就来分析这个文件的操作.
该文件对应的操作集为
proc_cgroupstats_operations.定义如下:
static struct file_operations proc_cgroupstats_operations = {
.open = cgroupstats_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
}
从上面看到,这个文件是只读的.
先来看open时的操作,对应接口为cgroupstats_open.代码如下:
static int cgroupstats_open(struct inode *inode, struct file *file)
{
return single_open(file, proc_cgroupstats_show, NULL);
}
Single_open()函数十分简单.它也是sequences file中提供的一个接口.有关sequences file部份我们在上面已经分析过了. 这里就不再详细分析了.它将seq_file的show操作指向了proc_cgroupstats_show.
我们在上面的proc_cgroupstats_operations结构中可看到,它提供的read操作为seq_read().它就是调用seq_file中的相关操作.在open的时候,已经将seq_file的show接口指向了proc_cgroupstats_show().代码如下:
static int proc_cgroupstats_show(struct seq_file *m, void *v)
{
int i;
seq_puts(m, "#subsys_name/thierarchy/tnum_cgroups/tenabled/n");
mutex_lock(&cgroup_mutex);
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
seq_printf(m, "%s/t%lu/t%d/t%d/n",
ss->name, ss->root->subsys_bits,
ss->root->number_of_cgroups, !ss->disabled);
}
mutex_unlock(&cgroup_mutex);
return 0;
}
从代码中看到,它就是将系统中每subsys名称.所在hierarchy的位码. Hierarchy下面的cgroup数目和subsys的启用状态.
测试如下:
[root@localhost cgroup]# cat /proc/cgroups
#subsys_name hierarchy num_cgroups enabled
cpuset 0 1 1
debug 2 2 1
ns 0 1 1
cpuacct 0 1 1
memory 0 1 1
devices 0 1 1
freezer 0 1 1
从这里可以看到所有的subsys和hierarchy的情况.在上面显示的debug和其它的subsys不同.是因为用的是之前测试notify_on_release的环境.如下示:
[root@localhost cgroup]# tree ../cgroup/
../cgroup/
|-- debug.cgroup_refcount
|-- debug.current_css_set
|-- debug.current_css_set_refcount
|-- debug.releasable
|-- debug.taskcount
|-- eric
| |-- debug.cgroup_refcount
| |-- debug.current_css_set
| |-- debug.current_css_set_refcount
| |-- debug.releasable
| |-- debug.taskcount
| |-- notify_on_release
| `-- tasks
|-- notify_on_release
|-- release_agent
`-- tasks
1 directory, 15 files
10.2:proc下进程镜像中的cgroup
除了在proc顶层目录创建cgroup外.另外在每个进程镜像下都有一个cgroup的文件.如下示:
[root@localhost cgroup]# ls /proc/648/cgroup
/proc/648/cgroup
来看一下这个文件对应的操作,如下示:
static const struct pid_entry tid_base_stuff[] = {
......
......
#ifdef CONFIG_CGROUPS
REG("cgroup", S_IRUGO, cgroup),
#endif
......
}
#define REG(NAME, MODE, OTYPE) /
NOD(NAME, (S_IFREG|(MODE)), NULL, /
&proc_##OTYPE##_operations, {})
从上面可以看到.Cgroup对应的操作为&proc_cgroup_operations
定义如下:
struct file_operations proc_cgroup_operations = {
.open = cgroup_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
Open对应的操作为cgroup_open.定义如下:
static int cgroup_open(struct inode *inode, struct file *file)
{
struct pid *pid = PROC_I(inode)->pid;
return single_open(file, proc_cgroup_show, pid);
}
又见到single_open()了.如上面的分析一样,read操作的时候会转入到proc_cgroup_show().代码如下:
static int proc_cgroup_show(struct seq_file *m, void *v)
{
struct pid *pid;
struct task_struct *tsk;
char *buf;
int retval;
struct cgroupfs_root *root;
retval = -ENOMEM;
buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!buf)
goto out;
retval = -ESRCH;
pid = m->private;
tsk = get_pid_task(pid, PIDTYPE_PID);
if (!tsk)
goto out_free;
retval = 0;
mutex_lock(&cgroup_mutex);
/*遍历所有的cgroupfs_root*/
for_each_root(root) {
struct cgroup_subsys *ss;
struct cgroup *cgrp;
int subsys_id;
int count = 0;
/* Skip this hierarchy if it has no active subsystems */
/*如果hierarchy中没有subsys.就继续下一个rootnode就是这样的情况*/
if (!root->actual_subsys_bits)
continue;
/*打印hierarchy中的subsys位图*/
seq_printf(m, "%lu:", root->subsys_bits);
/*打印hierarchy中的subsys名称*/
for_each_subsys(root, ss)
seq_printf(m, "%s%s", count++ ? "," : "", ss->name);
seq_putc(m, ':');
/*进程所在cgroup的path*/
get_first_subsys(&root->top_cgroup, NULL, &subsys_id);
cgrp = task_cgroup(tsk, subsys_id);
retval = cgroup_path(cgrp, buf, PAGE_SIZE);
if (retval < 0)
goto out_unlock;
seq_puts(m, buf);
seq_putc(m, '/n');
}
out_unlock:
mutex_unlock(&cgroup_mutex);
put_task_struct(tsk);
out_free:
kfree(buf);
out:
return retval;
}
它的核心操作在这个for循环中,它的操作在注释中已经详细的说明了.在这里不做详细分析.
我将虚拟机重启了 *^_^*,所以现在的环境不是我们之前的测试环境了
测试一下:
[root@localhost ~]# cat /proc/646/cgroup
[root@localhost ~]#
说明当前系统中还没有hierarchy.
接下来挂载上一个:
[root@localhost ~]# mkdir /dev/cgroup
[root@localhost ~]# mount -t cgroup cgroup -o debug /dev/cgroup/
[root@localhost ~]# cat /proc/6
6/ 609/ 646/
[root@localhost ~]# cat /proc/646/cgroup
2:debug:/
[root@localhost ~]#
从上面可以看到.系统已经有一个hierarchy.且绑定的是debug subsys.当前进程是位于它的顶层.
继续测试:
[root@localhost ~]# mkdir /dev/cgroup/eric
[root@localhost ~]# echo 646 > /dev/cgroup/eric/tasks
[root@localhost ~]# cat /proc/646/cgroup
2:debug:/eric
[root@localhost ~]#
可以看到,当前进程是位于eric这个cgroup中.
十一:小结
在这一节里,用大篇幅详细的描述了整个cgroup的框架.cgroup框架并不复杂,只是其中的数据结构和大量的全局变量弄的头昏眼花.因此理顺这些数据结构和变量是阅读cgroup代码的关键.另外在cgroup中对于RCU和rw_mutex的使用也有值得推敲的地方.不过由于篇幅关系,就不再分析这一部份.在接下来专题里.以cgroup框架为基础来分析几个重要的subsys.
分享到:
评论

相关推荐

Global site tag (gtag.js) - Google Analytics